The Ghost Immobiliser
Immobilisers are a potent weapon in the fight against vehicle theft. They prevent vehicles from starting without a key fob and are effective in stopping hotwiring as well as traditional methods of vehicle theft. However, more modern methods such as key replication and relay theft are becoming more widespread.
To combat these latest trends The ghost immobiliser is designed to make your car completely undetectable. It is silent and stealthy and does not use key fobs, radio signals or LED indicators.
Easy to install
The Ghost Immobiliser is a revolutionary device that connects to the CAN data network inside your vehicle to stop key cloning and theft. ghost 2 immobiliser reviews is a TASSA-approved product and insurance companies have endorsed it. It is almost unnoticeable by thieves and operates in silence. It uses buttons on your steering wheel, centre console and door panels to create an unique pin code that must be entered before you can start your vehicle. You can create as many as 20 different sequences in order to increase security. The system is simple to install and doesn't require additional hardware.
To ensure the best possible results it is recommended you use a reputable CAN-immobiliser installer who is skilled in your particular vehicle. Ideally, they will have a workshop close to you that you can visit to complete your installation. There is also an array of tools and equipment that can help you with the installation. They will have basic hand tools, multimeters insulation tape and heat shrink tubing for protecting the connections. A user manual will give you the necessary instructions for your vehicle's wiring.
Before starting the installation remove the battery from the circuit to prevent short circuits and airbag deployment. Double-checking the CAN L and CAN H wires is essential because a mistake in identification could result in a faulty integration of the system. It is recommended to mark the wires using small pieces of tape or label them with labels. Utilize a multimeter to verify that the power source is supplying an uninterrupted 12V.
Advanced thieves can use various methods to evade Ghost Immobilisers, such as blocking or spoofing. These methods are based on amplifying signals from the key fob to your vehicle's electronic controller unit. With advanced anti-jamming technologies and constant monitoring, your vehicle can be protected from these sophisticated attacks.
Increased security
Ghost immobilisers provide an additional layer of protection to safeguard your car from theft. It uses a PIN protection system that is entered by pressing buttons on your steering wheel or dashboard making it difficult for thieves to steal your vehicle. The device is also designed to be hidden in the vehicle, and is devoid of LEDs or other signals that would warn thieves of its presence. It connects directly to the ECU of your vehicle via the data bus. This means that it is not vulnerable to relay attacks or hacking.
The system is a valuable investment for those who own high-end vehicles, as they are at a higher risk of being stolen due to their worth and the popularity. The enhanced features of the system protect your vehicle from key cloning and ECU swapping. Ghost immobilisers can be paired with apps, so you can arm or disarm quickly. They can be equipped with a service/valet option that lets you temporarily disable the immobiliser while your vehicle undergoes repairs or maintenance.
Ghost immobilisers also have a great feature that is that it doesn't need any wire cutting. This is a great option, particularly if you have a newer car which does not come with immobiliser technology built-in to it. Certain systems can also be integrated with GPS tracking devices, which can provide an extra layer of security to your vehicle. A GPS tracker could also lower your insurance rates. If you decide to purchase a ghost immobiliser make sure it is TASSA-verified and that an expert installer installs the device for you.
Compatible with all major models and brands
The Ghost Immobiliser is designed to work with all major brands and models of vehicles protecting your prized possessions from theft. It generates a unique pin code by pressing buttons on your steering wheel, console or door panels. You must enter the code before you can drive. It is tamperproof, undetectable and backed by three-year guarantee. It is also fully endorsed by insurance companies. This means you can lower your insurance cost of insurance.
The Ghost system is different from traditional immobilisers that rely on the key fob for ignition control. ghost 2 immobiliser problems is directly connected to the engine controller via the CAN bus. This means it is secure from tampering, is nearly impossible to remove or disable and cannot be hacked by organised car thief criminal gangs. In addition, Ghost is tamper-proof, meaning that it is virtually impossible to disable or remove. Ghost system can be linked with a secure iPhone application that allows remote management and monitoring.
You can set an PIN code that is easy for you to remember but mathematically difficult for thieves to figure out. The PIN can be customised and changed at any point so that you can ensure your vehicle is safe even when you park it on the street or in a parking lot. You can also select a valet or service mode in case you require someone else to drive your car for a brief period such as when it's in garage for maintenance. This feature will also help to prevent your car from being taken by a shady mechanic. To ensure your peace of mind you can choose a Ghost call alert to notify you if your vehicle is in motion or if it's been moved.
Convenience
The ghost immobiliser is an effective security device that protects your vehicle from common methods of theft such as key cloning, key stealing and relay attacks. It works by connecting to the vehicle's data network CAN, and preventing communication with the engine ECU. This makes it difficult for thieves to clone or hack your car, making the installation of this system a great idea for any driver.
After installation, you'll need to enter a PIN up to 20 digits in length using the buttons on the dashboard and the steering wheel to begin the vehicle. The system is completely hidden and undetectable to thieves, because it does not emit any radio frequency signals. It can also be programmed to an individual-changeable PIN code which adds security. browse this site is also designed to stop cutting the circuit and makes it virtually impossible to tamper with.
If you do get lost in your PIN, there are some systems that allow you to communicate with the immobiliser through an app on your phone to disarm it immediately. Some even have a service/valet mode that allows you to start your car temporarily, such as when you need to drop it off for maintenance or valet parking.
The Ghost Immobiliser is also undetectable to thieves because it doesn't transmit radio signals, which is a significant advantage over other aftermarket vehicle security systems. Additionally, it is easy to use and doesn't require any complicated wiring. It can be used combination with dash cams to provide additional security. Dash cam Thinkware F70 features clear and crisp 1080p HD footage, Format Free Technology, and parking mode. The system can also be wired for optimal performance and longevity.
Installation
If you want to protect your vehicle from theft, it's important to choose the right immobiliser ghost. This device can prevent car theft by blocking the communication between your engine controller unit (ECU) and key fobs. This device blocks thieves from intercepting and cloning the signal to start your vehicle. It also detects if it has been tampered and alert the vehicle owner.
The device is easy to install and can be used with the existing systems in your vehicle. It doesn't require any modifications to the wiring in your vehicle and can be placed in a hidden place such as under the dashboard. Follow the steps in the manual to ensure the device is installed correctly. After installation, it's crucial to test the system. This will ensure that the immobiliser ghost is functioning as intended.
You can purchase an Autowatch Ghost 2 Immobiliser from an authorized installer and have it installed on your vehicle. The installer will connect the Ghost to the CAN Bus network in your vehicle, which makes it difficult for thieves to take it off or bypass the system. Installation generally takes between 2 and 3 hours.
It is recommended that you consult the wiring diagram of your vehicle prior to the installation process. This will help you locate the CAN High and CAN Low wires required to connect the Ghost to the engine of your vehicle. It is also important to verify the connections to ensure that they are secure and insulated.
Once the installation has been completed, you can begin using the Ghost Immobiliser as normal. It will disable the ignition of your vehicle if it is not able to start it with the correct PIN, which you will need to enter yourself. The immobiliser ghost can be set to Service/Valet Mode for when you require your vehicle to be serviced or valet parked.