Ghost 2 Immobiliser Reviews
The Ghost 2 immobiliser makes use of cutting-edge technology to prevent car theft. The device is hidden by thieves, and it only starts the engine when a pin or app is entered.
It connects to the CAN data network of your vehicle and is weatherproof. It also comes with a service/valet mode, which allows you to start your car for a short period while it's in garage for cleaning or servicing.
Easy to install
The Ghost immobiliser shields your car from key theft or hacking, as well as cloning. It utilizes an PIN code system that is integrated into your vehicle's electronic control unit, making it impossible for thieves to identify. Contrary to traditional immobilisers it doesn't require special keys or sensors and is completely hidden from view without any LED indicators or signals to signal its presence. It's also less expensive than replacing an ECU or installing a key fob. You can even reduce the cost of insurance.
When installing a Ghost 2 immobiliser, be sure to follow the instructions of the manufacturer carefully. This will ensure that the device is working correctly and efficiently. Test the system after installation by entering the PIN number and then starting the car. Regular testing will enable you to identify any problems early.
Check the location of the the CAN H and L wires prior to starting the installation. They are vital to powering the immobiliser, and it is essential to ensure that they are connected correctly. It is also a good idea to label the wires to make it easier to locate them when installing the device. Once you've identified the locations of these wires and connected them to a continuous 12V power source and the grounding point. Use a fuse tap to protect the connections from damage or short-circuits.
After connecting the wires, tidy the wiring using cable ties to avoid alteration. You can also cover the connections using insulation tape or heat-shrink tubing. This will shield the device from electrical shorts, and extend its lifespan. Once the wiring is secured, it's a good idea to test the Ghost 2 immobiliser.
In situations where you have to surrender your vehicle, such as for servicing or valet parking or valet parking, the Ghost 2 immobiliser has a service mode that temporarily disables the PIN code sequence. To activate this feature, simply press the brake pedal while holding down the accelerator, and press a number of times that is equal to the first digit of the emergency code. The system will then enter service mode, which is confirmed by flashing the indicator signal five times.
Easy to change PIN codes
A ghost 2 immobiliser is an excellent way to safeguard your car from thieves. It is concealed within the vehicle, and can only be accessed with a code. The device is directly connected to the vehicle ECU through its data bus. It does not rely on radio frequency signals, as do traditional Thatcham immobilisers or aftermarket alarm systems. This makes it difficult for thieves to listen for the click of a conventional immobiliser relay or to install new key fobs. The control unit is concealed within the wiring harness or dashboard and cannot be physically altered to reset the system.
The ghost 2 immobiliser connects to your vehicle's CAN Data network and uses existing buttons on the steering wheel, door panels and the centre console to create a customisable sequence of up 20 button presses that must be entered before the engine can start as it would with a PIN code. This unique system can be reprogrammed and doesn't require wire cutting during installation. You can even put your vehicle in Valet or Service mode to allow it to be started temporarily while you are giving it to a mechanic to work.
The app can also be used to disable your PIN number if you've lost your keys, or change it. This feature is particularly helpful if you've given your car to another person for parking or valet services. It will stop them from starting it and driving it away without your permission. It's also inaccessible to professional thieves because it doesn't utilize circuit cuts or radio frequencies.
Another excellent feature of the ghost 2 immobiliser is its capability to prevent relay thefts. Relay theft is among the most common methods of car theft. Criminals can hack your car's diagnostic ports, then alter the signal sent by the car's ECU to fool it into thinking that a valid car key is present. The traditional immobiliser can be bypassed in this way, but with the ghost 2 immobiliser the signal is blocked by the immobiliser before it gets to the ECU.
Easy to use app
Ghost 2 is a revolutionary immobiliser that protects your car from key-cloning, hacking and key theft. It connects to the CAN data network of your vehicle and requires an PIN code to start the engine. It also prevents thieves using signal spoofing or device spoofing which are common techniques used to steal vehicles.
The system is easy to use and operates like a standard car alarm. Installing ghost 2 immobiliser problems allows you to create an individual 20-digit PIN code that you must enter prior to starting the vehicle. This will protect the vehicle from being taken even if your keys are stolen. You can turn off the system using an app for your smartphone.
The ghost is quiet, and it does emit radio frequency signals. It is a weatherproof, discreet device that can be placed in any vehicle. It can be concealed beneath the dash, steering wheel, or door panels. It communicates with your ECU via the CAN data circuit, and is not affected by diagnostic tools, which some thieves employ to locate security systems. It is also not affected by jamming devices that alter codes.
It is a hidden system that can be used to prevent the theft of all vehicles. Its technology has been proven be effective and complies with TASSA standards. The ghost is a great solution for classic, sports and luxury automobiles, and can also be used to secure cars that are let out on websites like Turo.
The Autowatch Ghost 2 is the next generation in vehicle immobilisers. This system is invisible to thieves, and prevents them from starting your car without your PIN or unless they have been authorized by the app. It does not emit radio frequencies or any other signals that scanners detect. Installation is fast and simple. The app is user-friendly with a simple interface and simple navigation. It also includes an GPS tracker to assist police locate and recover the vehicle.
Simple to reset
It is possible to safeguard your vehicle from theft by using an immobiliser that is ghost 2. It integrates with your vehicle's ECU to create a security barrier that thieves are unable to penetrate without the correct PIN. It's also TASSA-certified, which means that it is recognized by insurance companies. It's a powerful tool for preventing car theft and will save you a lot of dollars in the long run.
Unlike traditional alarm/immobilisers that require cutting circuits for circuit cutting, the Ghost system is directly connected to the vehicle's CAN network and operates using your existing buttons on the dashboard as well as the steering wheel. You can set up an individual PIN sequence, which can be up to 20 presses long. This PIN has to be entered before the engine can begin the same way as the credit card's PIN. Ghost is unnoticeable to thieves and has no LED indicators to make it obvious that it is there and makes it the most efficient aftermarket CAN bus immobiliser available on the market today.
The Ghost system also has a benefit that it does not transmit radio frequency signals. This means it is not detected by thieves or snatched up. This can prevent relay attacks and keys that are cloned and also the more usual method of hacking a vehicle's CAN bus system by looking for signals from its alarm or immobiliser. In addition, the Ghost system is designed to be completely hidden inside the vehicle, and there are no LEDs or signals to indicate its presence.
The system comes with an option called Transport Mode which disables the Ghost System. This is beneficial for situations when you require temporarily deactivating Ghost such as when you're transporting or servicing your vehicle. However, this mode is not as effective as Service Mode, as it does not deactivate the system when your vehicle speeds over 31 mph for fifteen minutes.
You will need the emergency code from your installer to reset your Ghost 2 immobiliser. It is usually hidden under a scratch-off area on the card included with your installation. This emergency code should be secured and kept in a safe place, such as an at-home wallet.