Protect Your Vehicle With a Ghost Vehicle Immobiliser
Ghost immobilisers protect your car from theft by car without the need for an additional key. These systems can't be detected by radio scanners and are weatherproof.
Both Autowatch Phantom and CAN Phantom come with a PIN code emergency override that can be used in the event that the device is removed from the vehicle. These devices are TASSA certified (Tracking and Aftermarket Security System Association) and could lower your insurance premium.
Guards your vehicle from key copying and ECU swapping
With car thefts on the rise, it's important to make sure your vehicle is secure from thieves who are constantly developing new tactics to bypass security systems. This could include cutting wires or using diagnostic scan tools or copying key fobs. One of the best methods to accomplish this is to have an immobiliser for the ghost vehicle fitted.
This device is so effective because it doesn't require an alarm or keyfob to function. Instead it connects to your ECU and CAN data network to prevent the car from starting, making it far more difficult for thieves to steal cars even when they have keys.
The system works by using the buttons already present on your steering wheel, centre console or door panels to create a customisable pin code sequence (which can be as many as 20 presses) that must be completed before the car can start. This code is unique to you and can be altered at anytime, making it impossible for a thief to guess or crack it.
You can add a service mode your pin code to allow you to start your car and drive it without the need for PIN codes. This is useful for emergencies such as when you need to take your car to the garage or to be serviced.
An important feature is that the system can be linked up with an automatic phone call to alert you that your vehicle has been tampered or stolen. ghost 2 immobiliser near me is possible to set it up to send an email or text message and be linked to GPS tracking devices.
Certain thieves have used jamming devices or spoofing to avoid the Ghost system. This can be avoided by using modern anti-jamming technology and continuous monitoring of your vehicle.
Finds out if there is a tampering
The Ghost is designed to ensure that it can be concealed inside the wiring harness of your vehicle, making it hard for thieves to find. It connects to the vehicle's CAN network in order to stop key cloning and ECU swapping. However it is not detected with the use of LED indicators or keyfobs. It is also tamperproof and cannot be altered using wire cutters or other tools. Its compact size allows it to be put in any place in the vehicle, and could even be put inside the engine. It can be paired with an GPS tracker to provide an additional layer of security.
It is also able to detect the presence of other vehicle immobilisers and tampering, so that it can take longer for thieves to take your vehicle. This makes it a very effective weapon in the fight against vehicle theft, particularly for high-value vehicles with costly modifications. It can be linked to an iPhone application that allows you to arm and disarm the device from a distance. You will also be able to receive call alerts if someone attempts to steal or tamper with your vehicle.
Many people opt to install an immobiliser ghost on their vehicle to increase the security it provides. The system can prevent key duplicates, ECU swapping and even relay attacks. It can be linked with a GPS tracking device to boost its effectiveness. It is also possible to stop the engine of your vehicle in the event of a change in its normal location.
Some drivers have reported issues with their stop/start feature after installing the Ghost, but these issues are typically isolated and do not necessarily mean that there is a problem with the immobiliser. It is important to check that the device has been installed by a reputable company and is compatible with your car before purchasing it.
The TASSA ghost II immobiliser, which is the most recent in vehicle security technology, can protect your car against key cloning and ECU swapping. It can be linked to an iPhone application that allows you to arm and dearm it remotely, and also monitor your vehicle's health status. It is covered by a five-year guarantee and can be connected to your insurance policy for extra peace of mind.
Detects relay attacks
There are numerous security solutions that can be employed to stop vehicle theft. Specialised locks or tracking devices, as well as ghost immobilisers are all readily available. These systems detect the signal coming from the key fob and prevent the engine from starting until a PIN code is entered. They also shield the vehicle from hacking and cloning which makes them a powerful security measure against determined thieves. However there are a myriad of ways for thieves to get around these systems.
Relay attacks are among the most common methods used to disable immobilisers. This method involves two thieves working together, one of which stands close to the car with a device that is able to detect the key fob's signal. The signal is relayed to another device, which is located near the engine controller unit. This tricked the system to believe that the key fob was in the vicinity which allowed thieves to start their vehicle.
The Autowatch Ghost Immobiliser is a highly advanced CAN-based system that is designed to protect against these kinds of attacks. It works with the vehicle's CAN (Controller Area Network) system and integrates seamlessly into the existing OEM security system. It is compatible with a variety of vehicles and is invisible to prevent ECU hacking. It is a low-cost replacement for the original security system.
The Ghost Immobiliser is unlike other security devices in that it does not use key-fobs or LED indicators. It is instead installed in the wiring of the vehicle, making it hard for thieves to detect. It is also tamperproof and will only activate when it is notified of the PIN number of the owner of the vehicle. This makes it a great option to shield vehicles from ECU hacking and cloning.
The choice between the Ghost Immobiliser and the Relay Immobiliser depends on your personal preferences and the level of security you want for your vehicle. The Ghost Immobiliser provides high security and undetectable installation while the Relay Immobiliser is more user-friendly however it is not without risks. The decision is ultimately dependent on you and your needs, but both are excellent options to protect your vehicle from theft.
Detects CAN bus bypass
The Autowatch Ghost immobiliser is a top-of-the-line device that protects vehicles from key cloning, hacking and ECU swapping. The device uses the CAN network of the vehicle to hide from thieves, and doesn't require additional wiring. It doesn't emit any signals that could be detected by scanning technology, which makes it a powerful device against modern methods of theft. It can be paired with GPS tracking devices and physical locks to provide a solid defense against theft.
The Ghost is a highly advanced immobiliser that can be used to protect premium vehicles. It prevents the vehicle from being started until a PIN code with the standard remote is entered. This makes it harder for thieves to steal your vehicle and deter them from trying to steal it in the first place. This is especially useful for vehicles that are custom-built or expensive models.
It can be used on many different automobiles from all major manufacturers and is compatible with the majority of aftermarket components. The device can be installed by a professional and is usually discreetly positioned in the engine bay or under the bonnet of the vehicle. It does not require any cutting of the wiring or signalling systems, and is weatherproof. It's the ideal solution to protect your vehicle's pride and joy.
The Ghost's valet mode permits you to drive your vehicle while it is being serviced or towed to repair. This can be accomplished with a pin code or an override driver fob is kept in your vehicle. You can change back to the normal mode if you need to restart your car.
Another great benefit of the Ghost is that it can't be detected by diagnostic tools or listened to with a stethoscope. The device doesn't emit radio frequency signals as other security systems do. It blocks the engine by using the vehicle's data network CAN and can only be activated with a unique PIN.