12 Companies Are Leading The Way In Ghost Tracker Installation

· 6 min read
12 Companies Are Leading The Way In Ghost Tracker Installation

Ghost Tracker Installation

Ghost tracker installation is a discrete system that can be fitted in your vehicle without cutting wires or adding key fobs. This will ensure that the warranty of your car is not affected and that its aesthetics are not compromised.

Autowatch Ghost is a revolutionary aftermarket immobiliser that guards your vehicle against key hacking, cloning and ECU swapping. It seamlessly integrates with your vehicle's data network CAN.

CANbus Immobiliser

A system that prevents unauthorised persons from starting or driving the vehicle is required. This invention's CAN-based immobiliser is able to do this without modifications to the vehicle's wiring system or existing CAN data. It achieves this by immobilizing the logical aspect, as opposed to other methods that manipulate the physical low and high bus lines of the transceiver.

The CANbus immobiliser listens to the computer network of your car for a start request from the ignition system in the factory. Once a valid start request is received the Ghost will wait until it's authorized by you either with the use of a button sequence (4-21 presses on the buttons of your vehicle) or a mobile phone with an app (depending on the model) before allowing engine starting. It will also turn off any key fobs that are in use and alarms meaning even if the original key FOB is removed it will not be able start your vehicle.

This means that the CANbus immobiliser is the only product available that stops key cloning as well as other types of vehicle theft. It's a simple device that can be purchased online from various retailers and then installed at home by people with some basic electrical skills. There are a lot of professional installers who provide this service in the UK.

Once the system has been activated, it will stop engine starts by interfering in the CAN bus signaling between the ECU (engine control unit) and other devices inside the vehicle. This is accomplished by a tiny microprocessor that detects CAN signals that are sent between the ECU and other devices inside the vehicle.  ghost 2 immobiliser problems  and then injects it onto the CAN bus. This fake message alerts other devices that the ECU-subsystem in question is currently busy, and prevents them sending commands to the specific ECU.

Depending on the model it is possible to combine it with other features, such as the GPS tracker or battery monitor. These additional features are accessible via the same mobile App which makes it easy to use. The Ghost is also TASSA certified, which is vital as insurance companies will want proof of your immobiliser prior to covering any potential damage to the vehicle or its contents.

Distinction & Silence

Contrary to other systems which can be heard over the vehicle's stereo system and are therefore easily recognized by criminals, a ghost tracker is hidden inside your car, so they can never know that it's there. It also works silently, meaning that criminals will only be aware of the alarm if they're close to your vehicle. This is an innovative system that provides a high level of security that can't be beaten by thieves. You can alter the pin code at any point to ensure that you're the only person who knows it. It makes use of CAN to communicate with your vehicle. This means it can be installed on a variety of vehicles, including those which do not have an OBD port.

In recent years, thieves were able to hack into vehicle security systems using an easy hack. Ghost immobilisers on the other hand, work discretely to stop key duplicates. They connect to the CAN data network of your vehicle and block it from starting until you enter a secret pin code using the buttons on your steering wheel and the dashboard. This makes it difficult for thieves to hack or detect the device.

In addition, ghost immobilisers can be used with a variety of vehicles, making it easy to find the one that's suitable for your vehicle. They're also transferable in the event that you decide to purchase another vehicle later on.

However, you must ensure that your ghost immobiliser is installed by a certified installer to avoid any potential security issues or technical issues. This is particularly important since the device needs to be wired into the vehicle's electronic system and requires specialized expertise and tools. Furthermore, this process could take some time and should be done by a trained professional. This can increase the cost of the installation, but will give you peace of mind for the rest of your life and protection from theft. It's also a great way to lower your insurance costs and save money over the long term.

No Key Fobs Required

Ghost immobilisers can be an additional layer of vehicle's security, preventing key cloning or hacking. The device will not allow thieves to start your vehicle until the PIN code is entered. It can be deactivated quickly when you take your car to valet parking or for service. It's also insurance-approved easy to set up, and discreet.

In contrast to other security systems that use remotes or key fobs and key fobs, the ghost device is linked directly to the vehicle's communications network via the data loop of CAN. It is therefore unnoticeable and isn't detected by diagnostic scanners or other advanced devices that thieves could use to disable the system. This makes it very difficult for thieves and auto experts to evade the GHOST system.

Installed by an approved installer the device is seamlessly integrated into your vehicle, without cutting or splicing needed. This is a great way to protect the warranty of your vehicle and will not interfere with other devices. It also lets you transfer the system to another vehicle in the event that you decide to sell it.

Based on the ghost tracker you select, it will come with various features. For instance, some have GPS tracking capabilities that allow you to know where your car is at any given moment. Other models will provide detailed driving reports and fuel consumption. You should thoroughly research every option to determine the best one for your requirements.

It's also important to make sure your installer is certified by an independent authority prior to you hire them. This will ensure that you are not getting substandard work done that could endanger the safety or security of your vehicle. A good installer will be able to provide proof of their credentials and training. You should also keep receipts and any correspondence with the installer in case you have to submit a claim.

The correct installation is essential to safeguard your investment and providing peace of mind. The experts at Car Keys Solutions are here to help you find the ideal solution for your requirements.

No Radio Signals

Ghost trackers are not radio frequency transmitters, as opposed to other security systems that use RF signals to detect the presence of a vehicle. They are therefore unnoticeable by thieves using sophisticated codes and RF scanning to determine the type of security system that's installed in vehicles.


Ghost trackers don't lose power when exposed to high-frequency electromagnetic fields (EMFs) such as those produced by a nearby electric generator, or a high-powered radar. They work because they are built around a circuit which is not affected by EMFs. These systems aren't designed to resist a direct electrical surge or lightning strike.

Ghost trackers can be utilized to investigate paranormal phenomena and aren't only for the weak of heart. They're often used in conjunction with full-spectrum cameras to help investigators discover areas of the spectrum that are not visible to the human eye. Full-spectrum camera also allows investigators to capture various paranormal phenomena like mysterious infrared emissions and shadows that could suggest the presence of supernatural beings.

When used in conjunction with a GPS tracking device, ghost trackers are able to help investigators find the location of spirits. This is especially useful for large venues, like haunted theatres, where many ghosts may congregate in one room. Using GPS to pinpoint the location of a ghost can speed up the search for the ghost and aid in the process of capturing.

A ghost immobiliser is an excellent security measure for owners of high performance automobiles or high-end vehicles. Not only does it prevent your vehicle from being stolen by changing or cloning the ECU, but it also helps to cut your insurance costs. A ghost immobiliser that is approved by Thatcham installers, Trackershop Midlands, will protect your pride and joy from thieves and is easily hidden.

The Autowatch Ghost immobiliser is discreet and can be fitted to any vehicle. It is connected directly to the CAN data network and communicates in a silent manner, making it virtually invisible. It does not require any additional wiring or hardware, and can be altered at any time by entering a PIN number. It can also be used with an GPS tracker, which helps locate your vehicle in the case of theft.